CORE Connecting Multiple EDGEsΒΆ
In this example, we configure the CORE appliance of ISP 1
to connect to two
EDGE appliances of Customer 1
and Customer 2
using two SCION links. Each
SCION link is configured on a virtual network interface implemented as separate
VLANs on a single physical network interface as shown in the figure below.
We need to configure the following:
The physical network interface that is used as the link for the two VLAN interfaces in the
interfaces
section of the appliance configuration.The VLAN interfaces for the two SCION links in the
interfaces
section of the appliance configuration.The
CHILD
SCION links toCustomer 1
andCustomer 2
in thescion/ases/neighbors
section of the appliance configuration.
The relevant parts of the configuration for the CORE appliance of ISP 1
are
shown below.
Network Interfaces
{
"interfaces": {
"ethernets": [
{
"name": "eth0"
}
],
"vlans": [
{
"name": "eth0.100",
"id": 100,
"link": "eth0",
"addresses": ["169.254.0.1/30"]
},
{
"name": "eth0.200",
"id": 200,
"link": "eth0",
"addresses": ["fe80:1::1/64"]
}
]
}
}
SCION Links
{
"scion": {
"ases": [
{
"isd_as": "1-ff00:0:11",
"neighbors": [
{
"neighbor_isd_as": "1-ff00:1:10",
"relationship": "CHILD",
"interfaces": [
{
"address": "169.254.0.1:31000",
"administrative_state": "UP",
"interface_id": 100,
"scion_mtu": 1472,
"remote": {
"address": "169.254.0.2:31000",
"interface_id": 1
}
}
]
},
{
"neighbor_isd_as": "1-ff00:1:11",
"relationship": "CHILD",
"interfaces": [
{
"address": "[fe80:1::1]:31000",
"administrative_state": "UP",
"interface_id": 200,
"scion_mtu": 1452,
"remote": {
"address":"[fe80:1::2]:31000",
"interface_id": 1
}
}
]
}
]
}
]
}
}