Anapaya Appliance - Extreme 1130c

Welcome to the SCION world! This guide provides the initial connection steps to set up your Extreme 1130c device as an EDGE appliance.

Preparation

  1. Connect the power cord to the device.

  2. Connect a RJ45 cable to port 1 for Extreme hypervisor and Anapaya appliance management.

  3. Connect the RJ45 cable for WAN connectivity to port 2.

  4. Connect the RJ45 cable to LAN connectivity to port 3.

  5. Connect a serial cable to the Console port.

  6. Follow the Configure an appliance section in the latest Self Orchestration Deployment Guide from Extreme to set it up as a stand-alone UCP in self-orchestration mode.

  7. After completing the setup with the Basic Configuration Wizard, connect to the WebUI of the UCP using your browser and the IP address assigned to data port 1 and login with the default or your customized credentials.

../../../../../../_images/extreme-1130c-front.drawio2.svg

Installation of the Anapaya appliance image

  1. Download the latest Anapaya appliance Extreme VNF image tarball with the -extreme.tar suffix from Cloudsmith https://docs.anapaya.net/en/latest/edge/getting-started/base-image-installation/

  2. Upload the image to the UCP device by navigating to the UCP web interface and selecting Engines > Image Management > Choose Image file or Drag and drop image  here.

  3. Install the Anapaya EDGE as an Engine Application by navigating to Engines > Installation -> Install

  4. Under Anapaya EDGE appliance select AnanpayaEDGE #1 and deploy with the default settings.

  5. After a few minutes, the installation should be completed, and you can log into the Anapaya EDGE appliance via serial console. Navigate to Engines > Installation -> engine-image-name (blue text font) and choose the Console tab.

Initial Configuration

  1. Use the default credentials, user: anapaya and password: anapaya.

  2. Once logged in, you can set up the IP parameters as indicated by your support. For more information about initial configuration and IP address configuration, consult https://docs.anapaya.net/en/latest/gate/getting-started/guide/.

 

Interface mapping

Interface Name

Port Nr. on Device

Port Usage

Port Type

ICC1

Unused

RJ45 1G

ICC2

Unused

RJ45 1G

enp1s0

Not Used

RJ45 1G

enp6s0

1

Hypervisor & Management

RJ45 1G

enp7s0

2

Default WAN interface

RJ45 1G

enp8s0

3

Default LAN

RJ45 1G

enp9s0

4

Unassigned

RJ45 1G

The official manual of the Extreme 1130C hardware can be found at:

https://documentation.extremenetworks.com/Universal%20Compute%20Platform%201130C%20Installation%20Guide/GUID-B4B3C51C-E1F9-41F7-AEA5-8654CD78337F.shtml